Care, maintenance, and cleaning procedures for 3M™ Versaflo™ protective visors and helmets (M series)
Regular and proper care, maintenance, and cleaning are crucial for the protective effect and service life of 3M™ Versaflo™ protective visors and M-series helmets. The linked PDF provides a comprehensive overview of the procedures recommended by 3M—from inspecting individual components to suitable cleaning methods and correct storage.
The document also contains technical bulletins and linked videos that clearly explain maintenance, cleaning, and replacement steps and provide additional background information.
👉 For detailed step-by-step instructions, further information, linked videos, and technical bulletins:
Employer responsibility:
Care, maintenance, and cleaning of PPE in accordance with local regulations and 3M instructions for use.
Inspection:
3M recommends checking the device before each use, or monthly if used infrequently.
Cleaning:
Depending on the degree of contamination, wipe clean or, where appropriate, use a respiratory mask washing machine.
No solvents:
Organic solvents and abrasive cleaners can damage plastics.
Note the temperature:
When washing and drying, max. 50°C.
Cleaning agents:
Preferably pH neutral, without fragrances or dyes.
Helmet shell:
In the event of cracks, deformation, or severe impact, the entire head section must be replaced.
Dichtungen & Abdeckungen:
Regelmäßig auf Risse, Elastizität und Sitz prüfen, bei Bedarf austauschen.
Non-cleanable components:
Certain flame-retardant covers must not be cleaned, but must be replaced.
Storage:
Dry, clean, not in direct sunlight, and within the recommended temperature and humidity ranges.