3M Scotch Weld Epoxy Adhesive DP100

• Withstands static loads
• High shear strength
• Robust and features a very short working time
• Very good flow properties
• UL 94 HB certified

3M™ Scotch-Weld™ DP 100 is a hard, two-component, epoxy-based structural adhesive with a 1:1 mixing ratio. Very short working time allows the bonded parts to be loaded after a very short time. Good leveling properties

Dosing – mixing – application in a single step – for consistent and defined quality. High shear strength. Due to its transparency, 3M™ Scotch-Weld™ DP 100 can be used in a wide range of industrial applications. DP 100 is suitable for bonding metals, plastics such as ABS, FRP, PC, etc., as well as glass, ceramics, concrete, and wood. Excellent flow properties also make DP 100 attractive for applications in the electrical, construction, and consumer goods industries. Possible applications: bonding different materials together with high strength; very well suited for potting; applications followed by further machining; applications with transparent bond lines. Working time: 5 minutes – Hand-tight after 20 minutes 3M™ Scotch-Weld™ DP 100 is a hard, two-component, epoxy-based structural adhesive with a 1:1 mixing ratio. Cures at room temperature in 48 hours 3M™ Scotch-Weld™ DP 100 meets the requirements of UL 94 HB. Information about epoxy adhesives Epoxy-based structural adhesives achieve high tensile shear strengths of at least 10 MPa—even under difficult conditions. Epoxy adhesives are liquid reactive polymers that chemically react when mixed and cure into solid plastics. The chemical reaction takes place in the static mixer—both components are optimally mixed. From this point on, the working time begins and the curing process starts. Working time can range from a few minutes to many hours. High shear and peel strength combined with good chemical resistance