3M Scotch Weld DP8005 acrylate

• High-strength, rapid bonding of plastics with low surface energy (PE, PP, TPE)
• High shear strength – Good peel strength – Good impact resistance
• Simple and practical application – for consistently high and uniform quality in the bonding process
• Maximum strength through even distribution of load and stress across the entire bonded surface
• Available in translucent and black
• Structural adhesives replace mechanical joining methods such as screws, rivets or welds
• Reduce costs: Simple cleaning is sufficient – no additional pre-treatment required
• Bonding of low-energy plastics without surface pretreatment
• Rapid strength build-up
• Very short working time

3M™ Scotch-Weld™ DP 8005 is a viscoelastic, two-component, acrylate-based structural adhesive with a 10:1 mixing ratio. Bonding of low-energy plastics such as PE, PP and TPE (thermoplastic elastomers) without surface pretreatment

Simple cleaning is sufficient – no additional pre-treatment required 3M™ Scotch-Weld™ DP 8005 has been developed for the high-strength bonding of plastics with low surface energy. The product also bonds other plastics such as ABS, rigid PVC, PMMA, as well as fibre-reinforced composites, painted and primed metals, rubber, glass, ceramics and wood – with only minimal surface preparation required in each case. To achieve the best results, all surfaces to be bonded must be completely clean, dry and free from dust, oil, release agents and other contaminants. Fast and reliable bonding 2-component structural adhesive for the EPX system with low flow properties Working time at room temperature 2 to 3 minutes – hand-tight after 30 minutes Curing at room temperature after 24 hours Good chemical resistance and good ageing properties DP 8005 replaces screws, rivets and other mechanical fastening methods – the product bonds lightweight, low-energy plastics without damaging the surface structure. Possible applications Bonding of plastics and metals in the manufacture or repair of household appliances Bonding of low-energy plastics without pre-treatment, suitable for use in many material combinations Manufacture or repair of sports equipment Bonding of plastics with low surface energy such as PE, PP and TPE Bonding PC, rigid PVC and PMMA in a wide variety of applications Acrylate adhesives adhere just as well to low-energy plastics as they do to metals or fibre-reinforced composites. Two-component acrylate-based structural adhesives rapidly achieve high structural strength – even on slightly oily and soiled surfaces.