Scotch-Weld 1099 150ml

• High-strength plastic adhesive (strength increased by heat treatment)
• Resistant to oil, fuel, and plasticizers
• Enables strong and flexible bonds
• Maximum strength after heat activation
• Good resistance to aging and moisture
• Suitable for large components
• Maximum strength after heat activation
• Long open time

3M™ Plastic Adhesive 1099, with a 40-minute open time, dries quickly. The product is resistant to oil, fuel, and plasticizers. With an operating temperature range of -40 °C to +120 °C, it achieves good adhesion to many plastics as well as to rigid and flexible PVC.

Nitrile rubber-based plastic adhesive 3M™ Plastic Adhesive 1099 is a solvent-based adhesive for bonding decorative films to fiber-reinforced plastics, ABS, PA, rigid and flexible PVC, rubber, foams, metals, wood, leather, etc. – – creating strong and durable bonds. However, the product may cause staining on thin or light-colored vinyl surfaces. Possible Applications Bonding plastics and PVC Automotive repairs, including upholstery or dashboard installation Banners and awnings General industrial manufacturing Maintenance and repair Accelerating general bonding processes 3M™ Solvent-Based Adhesive for Plastics 1099 has good wetting properties and is easy to apply. Once the solvents have evaporated, strong bonds are achieved quickly. The bonding surfaces can be reactivated using solvents or by applying heat in combination with pressure. Additionally, the product can be easily sprayed—this allows for convenient application over large areas and ensures even wetting of the materials. Adhesive Application 3M™ Solvent-Based Adhesive 1099 is applied using a spray gun, brush, or roller. Stir the product well before use and apply evenly to both surfaces. If the solvent-based adhesive is applied in overlapping passes, this first coat should sufficiently wet most surfaces. Effective coverage is achieved once at least 80% of the surface is covered with the solvent-based adhesive. Highly absorbent and porous substrates may require a second application. Following the flash-off time, which depends on temperature, humidity, and air circulation as well as the porosity of the material surfaces, the components are joined within the bonding window.