Scotch Weld DP110 gray

• Withstands high dynamic loads
• High shear and peel strength
• Good flexibility when cured – suitable for bonding different materials.
• Working time at room temperature 10 minutes – touch-dry after 20 minutes
• Bonding of many metals and plastics, fiber-reinforced composites, concrete, wood, etc.

3M™ Scotch-Weld™ DP 110 is a flexible, two-component, epoxy-based structural adhesive with a 1:1 mixing ratio.

Dosing – mixing – application in a single step – for consistent and defined quality. Withstands high dynamic loads DP 110 bonds metals, plastics such as ABS and PC, fiber composites, ceramics, concrete, and wood. Excellent flow properties DP 100 plus is characterized by high shear, peel, and impact resistance as well as good flexibility. Due to these properties, the product is suitable for applications in the automotive and automotive supply industries, in specialty vehicle manufacturing, in metalworking and processing, as well as for the production of sporting goods. Possible applications: bonding different materials together with high strength. Very short processing time allows the bonded parts to be subjected to stress after a very short time. Hand-tight after 20 minutes. Short processing time allows the bonded parts to be loaded after a short time. Hand-tight after 20 minutes – cures at room temperature after 48 hours. Information about epoxy adhesives. Epoxy-based structural adhesives achieve high tensile shear strengths of at least 10 MPa—even under difficult conditions. Epoxy resin adhesives are liquid reactive polymers that undergo a chemical reaction when mixed and cure into solid plastics. The chemical reaction takes place in the static mixer—both components are optimally mixed. From this point on, the working time begins and the curing process starts. Working time can range from a few minutes to many hours. High shear and peel strength